sublijet information
transfer instructions:
- place transfer sample on substrate with printed side facing down.
(ceramic, metal, and glass substrates must be specially coated for sublimation.)
- press at medium to high pressure according to time and temperature
shown below.
- quickly peel transfer paper from substrate
sublijet time and temperature chart
surface |
time |
temperature |
polyester fabric |
20 sec |
400° f |
mugs |
180 sec |
400° f |
mouse pads |
25 sec |
400° f |
metal |
40 sec |
400° f |
dry erase boards |
60 sec |
400° f |
glass |
180 sec |
400° f |
sublijet xl time and temperature chart
surface |
time |
temperature |
pressure | remarks |
polyester |
35-45 sec |
400° f |
med./40 psi |
best for permanency and washability |
mouse pads |
35 sec |
400° f |
med./40 psi |
|
ceramic |
150-200 sec |
300°-400° f |
med./40 psi |
time varies with press |
metal |
60 sec |
375° f |
med./40 psi |
use absorbent backing behind transfer paper |
fr plastic |
45 sec |
400° f |
med./40 psi |
|
hanes digital l'ink t-shirt |
35 sec |
400° f |
med./40 psi |
preheat (press the shirt for 5 seconds to eliminate moisture.
use a teflon sheet between sides of the shirt to prevent "blow
through". |
unisub |
75 sec |
400° f |
med./40 psi |
|
|